TLDR:

  1. Check out the inventory here and send me a PM. The Google Sheet is the Master; it stays updated with what’s still available.
  2. Check the RAM, Drives and PSU tabs for other components.
  3. Provide serial number of item(s), paypal email address, and shipping zip code (I’m 08854, USA).
  4. I will reply with the total price. If you accept, I’ll send an invoice request through paypal (make sure your paypal mailing address is up to date).
  5. Once paid, I will share tracking info when I ship.

Check out r/repurposeddattos to collaborate on these devices!

I have a new paypal so repeat buyers, don’t be surprised. My main goal is to get these to people who can use them and save them from the landfill. Check out the inventory in the link above and let me know if you’re interested. Some of the Datto ALTO 3 V2 units are missing SATA cables and case bottoms. I can’t do anything about the cables, but I will 3D Print case bottoms for those without. Links to the .STLs are listed below for free if you want to DIY.

I have some AC adapters, RAM, and drives so you can have a complete unit shipped to you. Just pick and choose matching components from the Sheets to build it. I get these from other sources so they come and go.

Please check the very bottom of the post for answers before asking a question.

Proof 01/19/2024

MiniPCs (New items and reduced prices)

  • Datto ALTO 3 V2 BAREBONES (NO DRIVE, RAM, PSU) (Notes: 1,3,4,5,8,13,14,15) [$30-$40]

    • Celeron 3865U, 32GB DDR4 max (0GB installed), 1x 2.5” SATA cable, 1x m.2 SATA (2260), m.2 slot for WiFi/BT (empty), 3x USB 3.0, 1x USB-C 3.1, 3.5mm audio (covered by case), 2x HDMI, 1x DisplayPort, 1x RJ-45 Ethernet (Specs)
    • Limited number of SATA cables. Without the SATA cable will be $5 cheaper
    • See below for 3D Printed bracket to fit 2280 m.2s
    • I RAN OUT OF COMPLETE OEM CASES. MUST ACKNOWLEDGE YOU WILL PRINT ONE YOURSELF OR PAY FOR A PRINTED BOTTOM/FULL CASE.

  • Datto ALTO 2/Datto-1000 BAREBONES (NO DRIVE, RAM, PSU) (Notes: 1,3,5,6,9) [$45]

    • AMD GX-415GA, 8GB DDR3 max (0GB installed), 1x 2.5” SATA, WiFi/BT, 1x USB 2.0, 4x USB 3.0, 1x HDMI, 1x DisplayPort, 2x RJ-45 Dual-Ethernet

  • Datto ALTO 2 Alternate #1 (Notes: 1,3,5,6,9) QTY 2

    • AMD E2-1800, 8GB DDR3 max (0GB installed), 1x 2.5” SATA, WiFi/BT, 1x USB 2.0, 4x USB 3.0, 1x HDMI, 1x DisplayPort, 1x Gigabit RJ-45, 2x 3.5mm front panel (headphone & mic), eSATA port on back, SD Card reader front panel

  • Dell OptiPlex 3020M D08U (No PSU) See Google Sheet for specs/price

  • HP t520 (No PSU) See Google Sheet for specs/price

  • Dell OptiPlex 3040 & 3050 (No PSU, most missing fan assembly) QTY 9 [$20-$30]

    • 3040: i3-6100T, DDR3, SATA, 2x USB 2.0, 4x USB 3.0, 1x HDMI, 1x DP, WiFi/BT capable (No 2.5 drive caddy)
    • 3050: i3-6100T, DDR4, 2280 m.2, SATA, 2x USB 2.0, 4x USB 3.0, 1x HDMI, 1x DP, WiFi/BT capable (No 2.5 drive caddy)
    • Replacement fan assemblies can be found on Amazon starting at $15.
    • Drive caddies can be found on Amazon starting at $8.
      • If anyone wants to send me a drive caddy I’ll happily reverse-engineer it and provide a printed version for much cheaper than $8 (posting the .STL for free as usual).

Chromebox

  • ASUS CN62 Chromebox (NO PSU) (Notes: 1,10) [$30]
    • Celeron 3215U, 4GB DDR3 (16GB Max), 16GB m.2 SSD, WiFi/BT, 4x USB 3.0, 1x HDMI, 1x DisplayPort, 1x RJ-45 Ethernet, 3.5mm jack, SD Card slot

Other (New Items and reduced prices)

  • RAM Check Google Sheet for specific speeds and brands. I will be updating the sheet today with model numbers when I can.

    • SODIMM (Only available to those who buy a matching unit).

      • 2GB DDR3 [$4]
      • 4GB DDR3 [$8]
      • 4GB DDR4 [$8]
      • 8GB DDR4 [$15]

  • Drives

    • Various 120GB+ 2.5" Drives (Some Brand New in Packaging) [$11+]
    • Various 16GB-256GB m.2 (SSD & NVMe) Used [$5-$24]

  • AC Adapters/PSUs

    • AC Adapters for MiniPCs – See sheet for details

  • WiFi/BT Cards

    • See Google Sheet Tab for specs

  • EKWB EK-Quantum Vector RX 6800/6900 GPU Water Block FREE

    • Came with other items. I don’t have a GPU to test this. Looks in good shape

#Shipping info

  • My zip is 08854. Local pickup is available.
  • Everything gets packaged as securely as possible with as much recycled/reused material as possible.

General Notes

  • Please see Google Sheet (#1 in TLDR) to view inventory status. If all units of a model are sold out, I will strikeout/remove that item above.

  • These units are sold as-is. I cannot guarantee how long they will last. I don’t know where they come from. I’ve said in earlier posts on reddit, I get them from a metal scrapper who doesn’t know computers. This is why I test 100% for functionality before listing them.

  • I use Passmark’s CPU Benchmarks to get a reference for these units. I’ve plugged in the CPUs of some listed above.

  • MiniPCs with limited components (more working units than bottom cases, 2.5" SATA cables) will be sold complete by order priority until I run out, unless requested otherwise.

  • I don’t have many 2.5" drive screws. Sorry.

  • User reports these units work on a wide range of voltages, perfect for battery use

  • The Realtek RTL8111 Dual-NIC in many of these models is compatible with FreeBSD, which means they will work with OPNsense and pfSense

  • Redditor u/MrDrMrs flashed the Zotac firmware on a S3X1

  • I have WiFi Antennas for the WiFi models (ALTO 2 & S3X1 WiFi) available for $3. These are the ones I got

  • m.2 A+E card to Ethernet adapter works with Datto ALTO 3 V2 if you want to turn one into a router.

  • m.2 SATA expander cards work with the Datto ALTO 3 V2’s m.2 slot if you want to turn it into a NAS.

Referenced above

  1. Here’s an AC Adapter I’ve bought works well:

  2. WiFi/BT m.2 I’ve been referring (non-affiliate link)

    • Have not bought. Pulled Part No. off of Datto units with installed card. I have a couple extra listed on their own tab on the Google Sheet.

  3. Datto BIOS password: R@str

  4. One user reported a Celeron 3855U. I functionally test 100% of units, but not each unit’s hardware specs if they are visually identical.

  5. EDIT 12/20/2022 I no longer have OEM case bottoms. 3D Printed bottom covers will be available for $2.

  6. Units lack 2.5" drive holder. 3D Printed piece will be available for $1.

  7. FREE 3D PRINTED FILES. You’re welcome to save a couple dollars and print these components out yourself.

  8. Bottom case screws for the Datto ALTO 3 V2 are M2.5 x 40mm with a pan/flat head.

  9. Bottom case screws for all Datto units (except ALTO 3 V2 & S4X1) are M3 thread. OEM screws have rubber heads that act as feet. I bought socket-head cap screws to use with the 3DP bottom cases which sit inside, letting the case rest directly on the surface.

  10. See Mr. Chromebox for updating ChromeOS or installing Windows, Linux, or Kodi

  11. Dell WYSE BIOS password: Fireport

  12. Tutorial Installing Linux on a Dell WYSE Thin Client

    • Have not attempted. Cannot confirm.

  13. WiFi Card for ALTO 3 V2. I tested one of these second hand. There are kits on Amazon that come with antennas.

  14. Full 3D Printed case is available for $7.50. It’s expensive but it’s because I made it extra thick for strength, which increases material and printing costs.

  15. 3D Printed case bottom only is available for $2.50 while there are half-cases available. Unless specifically requested, either the 20mm or 40mm version will be provided depending on screw availability.