• Supervisor194@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    ·
    8 hours ago

    So I know there has to be a reason why these switches are vitally important but doesn’t it seem weird that you can take a catastrophic action like turning the fuel supply off when you’re in mid-takeoff? If you try and put a modern car in reverse at 65 MPH, the car is like “haha no” and ignores you.

      • Supervisor194@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        arrow-down
        1
        ·
        7 hours ago

        Yeah and of course, you can also just ram the thing into the ground. I hate to think this was a deliberate act, but it’s sure sounding like it.

    • neuracnu@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      3
      ·
      7 hours ago

      From the article…

      The fuel switches were “designed to be intentionally moved,” according to CNN safety analyst David Soucie, who said cases in which all fuel switches were turned off accidentally are “extremely rare.”

      “Throughout the years, those switches have been improved to make sure that they cannot be accidentally moved and that they’re not automatic. They don’t move themselves in any manner,” Soucie said on Friday.

      And the photo of the throttle (middle) and fuel cutoff switches (bottom):

      https://media.cnn.com/api/v1/images/stellar/prod/c-gettyimages-951922648-20250711223914009.jpg?q=w_1160%2Cc_fill%2Ff_webp

      There’s just one-level-deeper of questions I’d have here. How were the switches designed such that they prevented accidental activation? Because it looks like they just get simply flipped down. Could it be pull-out-and-down? Or maybe there’s a lot of resistance during the switch action?

      • halcyoncmdr@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        7 hours ago

        How were the switches designed such that they prevented accidental activation? Because it looks like they just get simply flipped down. Could it be pull-out-and-down? Or maybe there’s a lot of resistance during the switch action?

        The lever-lock fuel switches are designed to prevent accidental activation - they must be pulled up to unlock before flipping, a safety feature dating back to the 1950s. This isn’t a new or weird design. It’s essentially the standard used in basically every plane because it works.

        “It would be almost impossible to pull both switches with a single movement of one hand, and this makes accidental deployment unlikely,” a Canada-based air accidents investigator, who wanted to remain unnamed, told the BBC.

      • Darkassassin07@lemmy.ca
        link
        fedilink
        English
        arrow-up
        4
        ·
        7 hours ago

        They have metal detents; you have to pull the lever out, then push it down against a reasonably heavy spring.

        These had to be very deliberately moved to the cutoff position.