Hey folks, being the family IT man I’ve held onto all of my families photos/videos over the last 20 years

I’ve been pretty careless with the backups and I know if I don’t do anything it’s only a matter of time before I lose them

Although I’ve never used them, tape drives seem to be the best so I thought I’d ask here if anyone uses them for their homelab?

It might be overkill for a few GB of photos but I’d also use the tape drives for data hoarding purposes so it’s a win win in my book

  • markovs_gun@lemmy.worldEnglish
    5·
    1 day ago

    How much did this system cost? I have an idea for a product and one of the key parts of it is having a huge amount of local storage. I would need like 10x what you have though.

    • cass80@programming.devEnglish
      3·
      10 hours ago

      Don’t buy lto5. Lto6 is the sweet spot right now.

      I can buy lto6 drives on ebay for 250ish. Tapes are like 15-25 bucks each.

    • shellington@lemmings.worldEnglish
      3·
      23 hours ago

      The lto 5 drives are around $400 on ebay and the tapes can be had for around $20 each - less if bought in bulk and each tape hold 1.5TB.

      I don’t find it that slow as in the event of a restore like i am doing at the moment, I can get through around 3 tapes per 24 hours.

      One thing I will say is although newer LTO standards allow you to treat it like a normal drive it works better using proper software designed for the task like Iperius Backup.

      • shellington@lemmings.worldEnglish
        3·
        23 hours ago

        If you have a bigger budget around $2k something like LTO7 with 6TB tapes would be fantastic for larger data sets.

        • markovs_gun@lemmy.worldEnglish
          1·
          16 hours ago

          How much do those tapes cost if purchased in bulk? I am trying to figure out how much a petabyte storage system costs, and how much physical space this would take up, and how much electricity it would require to run. I had a lot of trouble finding this information on Google because I know so little about tape storage and don’t know what all I would need. I am probably not going to actually do anything with this but I am curious because I had this idea for a product and can’t get it out of my mind. The most important part (for the hardware portion) is having nearly a petabyte of physical, local storage. I am aware this would be quite expensive and relatively large, but the product would be intended for governments and companies not individuals.