JGrffn

Unexpected behavior, leading to unexpected inputs to systems, often leads to failures. Put simply, nobody thought X would happen on Y service or at Z level, so nobody wrote code to handle that scenario. May sound crazy at first, but it’s quite hard to cover all possible scenarios when writing code… Or with life in general.

I’m on Bazzite, so I may be tempted to switch to SteamOS on at least one of my devices, but Bazzite covers pretty much all my bases currently, both for gaming and work. I have a laptop with EndeavourOS and I love it, been using it for about 2-3 years there, but I’m switching laptops soon to a framework so I’ll also go with Bazzite there for consistency and due to the official support it has with framework laptops.

Honestly the experience I’ve had with these distros so far leaves me wishing for nothing more, and now with immutability and distro box I kinda don’t see the point in changing to anything else unless Bazzite development dies out or they make a painfully stupid decision, which doesn’t seem to be the case so far!

Legit question @people who know more about Theo than me, but isn’t Theo like, actually a pretty nice guy, even if right wing? Dude kinda reminds me a bit of Destin from SmarterEveryDay, who’s obviously on the redneck side of things, is right wing as far as I can tell, but is still extremely knowledgeable, incredibly chill, and actually cares about the foundations of his stances and doesn’t buy into divisionist rhetorics.

I might be assuming things and jumping to conclusions, which is why I am asking this, but I vaguely recall a video he made which clearly showed he held right wing positions but had no issue tearing down right wing propaganda and stances if they were bullshit.

Great, now show me the Linux ARM laptop that’s competing with MacBooks at the consumer level. You do have something that’s actively turning people away from Apple Silicon, yes?

What relevance does Linux have in this specific context? Does Linux have a marketing team? Does Linux compete on a hardware level with Apple? Is there a Linux corp we haven’t heard about that’s working with some chip manufacturer we also haven’t heard about in order to create ARM processors that can compete with Apple silicon? No? Maybe don’t shoehorn Linux into everything regardless of relevance, especially not in such a lane way.

Ngl that kinda sounds like Nix with extra steps.

I’m like OP, can find my way around things but am lazy. I second this recommendation, but I just had a negative experience on it die to laziness. Got lazy around updates, let them pile up to 600 pending updates, ran them all at once and my laptop just became unresponsive. Naturally, I forced its shutdown like a caveman and had to spend the following 6 hours recovering my partition. The nice thing is that endeavour at least has some nice commands to deal with just this kind of situation. The not so nice thing is that I was lazy about looking shit up, hence the 6 hours. The command that saved me was “reinstall-kernels”, fixed my systemd-boot in an instant and fixed whatever other mess I had caused.

So yeah, it can be frustrating sometimes. Especially if you’re lazy.

Yeah, as someone else mentioned, this step is just for creating a folder. You probably need to get more intimate with the commands you’re running to understand the process better, but I would honestly take a step back and use something more streamlined for these things.

Someone mentioned Proxmox for these things. I would also mention TrueNAS Scale. Both of those make it so that the process of spinning up containers and VMs becomes a lot more streamlined and easy to follow. They also forego a UI on the equipment you’re using, opting for a web UI you’d access from another device instead. Make no mistake, this is a good thing. 99% of things you’ll be wanting to do anywhere will be through web UIs, so that’s where you’ll want to be. The 1% of the time where you’ll be seeing your laptop server’s screen (or an SSH terminal) will be the most painful 1% of your life, and it will be when you misconfigured something and the web UI becomes inaccessible (on that note, also make sure to at least configure SSH access on something so you understand how that works). I’ve had to do this plenty of times with my pfsense box, and as a relative noob to these things as well, having to use nano and vim for editing pfsense configs to revive my server…it’s fucking horrible (sorry vim enjoyers). The good news is, you learn the hard way, but you learn. Try not to have this happen to you, or you’ll be back here soon. Once you’ve had a lot more experience with your tinkering, this will seem less daunting and you’ll be more comfortable debugging directly on your laptop server screen.

TrueNAS Scale, as the name implies, is better suited for when you want to include NAS Capatbilities on your setup. Since you mention things meant for Plex/Jellyfin setups, I’d say you could start there.

However you do mention a laptop, so I’m imagining a very basic setup where you probably have limited space or a couple of USB drives or something. You could, instead, opt for Proxmox. You lose the specific capabilities of creating complex RAID setups that TrueNAS would give you, but it sounds like you wouldn’t be needing those anyways, as they better fit a setup where you have a bunch of disks connected through SATA or PCIe interfaces. Proxmox is a lot more specialized for containers and VMs so it’s probably a good tool to get acquainted with, and might be better suited for a setup where you have just the laptop and maybe a couple of drives to toy around with.

Whichever you choose, make sure to watch YouTube videos about it, read the docs, truly understand what’s going on with that tool first, as well as how to set it up correctly. This will introduce networking concepts to you in the process, as you’ll need to understand how to access the computer through the network with a browser, as well as with SSH. Make sure you don’t ignore networking knowledge. It might seem daunting, or skippable (why bother with local domain names when you can just use the IP and port number?), but a lot of networking concepts are actually rather simple to follow, take a moment on the first few tries but become very easy to reproduce afterwards, and it will make your life easier (yeah turns out, now there’s 20 services and you forgot what ports are for what service…if only you had dedicated time to telling the network that port 69420 was for radarr.localdomain and port 42069 was for sonarr.localdomain).

I’d check out Lawrence Systems on YouTube. They make videos covering networking configs with pfsense and the like, as well as TrueNAS configs, and maybe they’ve delved on Proxmox? Craft Computing, another YouTube channel, for sure teaches about Proxmox. There’s tons of video guides for *arr services, I haven’t looked for platform-specific configs, but I’m sure you can find both videos for Proxmox and TrueNAS Scale configs. Once you get your first one, most other *arr services are very similarly configured (though not all are, some are very quirky).

Another thing you’ll need to understand is how containers work, as well as how to map things from outside the containers into them. Containers are, well, contained, and mappings are how you expose parts of the container to the outside. You’ll probably be guided to map things such as your data and the service’s config files from outside the container to better organize and persist those things. Make sure you understand this concept, where things are on your setup, where they’re getting mapped to in the container, and what this means when it comes to modifying the container (hint: it means you can delete or upgrade the container and things still work exactly as you configured them once your container is back up).

Maybe a controversial advice, but I’d steer clear of the console unless it can’t be helped, since you honestly can do a lot from the UI for the vast majority of things you’ll need to do. If you DO need to use the console, however, I’d bother ChatGPT and documentation for whatever youre doing, to make sure you understand what every command you try does. Things like “sudo mkdir xyz” should be crystal clear to you. In the case of this failed command, for instance, you should be aware that mkdir doesn’t create entire paths, but rather only specific folders. If the preceding folder doesn’t exist, the command fails, so if /home doesn’t exist, nothing else will work. If /home/user doesn’t exist, you’re not going to be creating /jackett_config, and so on. Sudo is also a very powerful keyword, which means whatever follows it is an order from the big boss and must be obeyed. As such, absolutely make sure you understand any command that starts with “sudo”, as those are the ones that can easily set fire to your entire config. If you don’t understand what it’s doing, don’t run it.

While we are on the subject of folder structures, theres no shame in looking up videos and docs explaining the Unix file structure. If youre coming from windows, this is a veeeeery easily confusing bit, and understanding where you are is very helpful.

Hopefully some of my ramblings make sense to you. Hit me up, or hit the community up, if you need more specific guidance. Things can seem daunting at first, especially if you’re new to Unix, but I promise you it becomes easier as you build good foundational knowledge.

Why boycott GrapheneOS? I feel a bit OOTL here, I only know the drama with the ex-lead dev, but I understand that the project as a whole is your best bet at a mobile experience that you control. Am I missing something?

Right? Twitter hasn’t stopped dead naming Twitter, for fuck’s sake

Huh, last I checked, the professional standard was Mac, at least for recording instruments. From what I vaguely recall, Windows has a latency issue due to how they handle audio stream inputs. I went through these woes myself once while using my guitar & Amp through my computer to practice with headphones on and having the music playing on top. The latency just doesn’t allow you to concentrate on what you’re playing, it completely distracts you. You can get it lower by doing something, I don’t remember what, but that solution ends up introducing random new bugs such as certain audio streams suddenly not playing at all for a while before fixing themselves, and it still doesn’t quite get latency low enough to not notice it.

If data structures weren’t working with MSVC, you’re probably working with non-portable code in the first place. Don’t assume an int is 32 bits long!

Oh absolutely! I was starting out during this time, and started using memcpy for a uni project, hardcoding byte sizes to what I assumed long’s size was, instead of checking or using standardized data types (because I didn’t even know they existed). The result was such a mess, exacerbated by the good ol “let’s write it all in one go and run it when we’re done”. Boy did I suffer in that class.

I haven’t touched compilers in a while, but I was a dirty little MS pig boy back in college. Qt with MSVC just made sense for me, with the single exception of non standard byte lengths for longs (almost cost me a class due to not using std uints, totally my bad but you don’t really expect compilers to understand basic data types differently).

The true shitfuckassface experience for me was ICC. Stupid little pig boy decided he wanted his Qt working with ICC, due to all dem optimizations for Intel CPUs. After hours of debugging nonsense errors and janking my way through Qt code which was way above my head, I finally got a Qt build, only to have ICC find thousands of completely removed errors in a project where no other compiler would find errors.

Yeah that was the day I stopped caring for C++, stopped licking intel’s ass, and started getting ever so slightly radicalized due to the lies of the republic.

Still absolutely not true

Lol that’s absolutely not true

but literally nothing is stopping you from running your own server.

Nothing except gmail’s very strict and hard to follow guidelines for spam filtering. Whether it’s a byproduct of spam filtering or whether it’s the intended result, the fact that Google essentially controls email traffic means you’re not gonna have a good time communicating with others using your self-hosted email. This issue has been raised by self-hosters getting blacklisted, all the way to companies getting rate limited. If your intended use is to communicate with your everyday person, and considering the everyday person probably uses Gmail, you’re in for a bad time at some point down the line.

Let’s not forget that email is technically a defederated platform and it was monopolized by Google anyway. It can and will be done if allowed to be done by complacency.

GUI alternatives are constantly improving and becoming more visually pleasing throughout distros, and besides, there’s real scenarios where normal people HAVE to use Powershell or CMD to get stuff done on Windows. This is becoming less and less of a hurdle.