![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://lemmy.ml/pictrs/image/q98XK4sKtw.png)
Debian. So many other distros are based on it anyway. I use it on damn near everything now.
Debian. So many other distros are based on it anyway. I use it on damn near everything now.
By DS, I hope you’re talking about a New 3DS, perhaps XL, and not the older DS models. Installing CFW on a New 3DS is pretty easy, and whether you buy your games or pirate them, there’s a giant library that could easily keep you occupied for 20+ years. Even if you stay offline. You can also run emulators, ROMs, and other homebrew to get even more use out of it.
If I was to buy a Switch, I’d want the OLED model, but they’re difficult to mod. Unless you have good soldering skills, you’ll likely have to pay for someone to install a modchip. That being said, the Switch is significantly more powerful than the 3DS. Will eShop be down for Switch in 20 years? Unfortunately, most likely. But with piracy, or games on cartridges, you could easily enjoy your games in 20+ years. The Switch can also handle emulating a lot of games that a 3DS just doesn’t have the power to.
Either system would be fine. I’d lean toward the Switch, unless you really want something that can easily fit in your pocket, can be modded without soldering, and should be a cheaper price point. I have collected every console Nintendo has made so far, and they all still work, as long as you take good care of them. The only exception is the Wii U, mine works, but they’re known for bricking because of cheap NAND chips, particularly from consoles sold at launch.
… specifically for football streams … search for nfl bite… you’re welcome…
I’ll go against the grain a little bit and say it’s a little weird. There’s nothing wrong with liking multiple distros, but a lot of people either stick with RPM-based (Red Hat, Fedora, CentOS, Rocky, OpenSUSE, Mageia) or Debian-based (Debian, Ubuntu, Mint, Pop!, Elementary). Then you have weirdos that like Gentoo, where nearly every package you install has to be compiled on the system. Or Arch, where the “installer” throws you in a terminal, and damn near everything has to be done manually to get your system up and running. And updates are “rolling release”, and if you try to update just one package without updating the rest of your system things can easily break.
I am mostly a fan of Debian-based distros myself. But I’ll use CentOS on a VM if I’m trying to self-host anything that recommends it.
My personal favorite is Debian. I’m the IT director at my job, and 90% of our machines, including end user workstations, are running some form of Linux.
One really nice thing is that most stuff is saved somewhere in your home directory. You can switch between all sorts of distros, and if you install the same software, browser, email client, etc. most of your stuff will automatically be there and work out of the box.
There really aren’t any cons, IF you do everything right. With a hacked V1, you can make a copy of your internal storage and put it on your microSD card. This is called an emuNAND.
With CFW, you can boot from the emuNAND and keep all your hacks, homebrew, pirated games, etc. on emuNAND. This way, you keep your sysNAND entirely clean. So you can go online with your sysNAND and your legitimately purchased games, and never worry about bans.
You can do just about anything you can think of with a hacked switch. You can pirate games, you can emulate games from just about any retro console. You can run Linux, you can run Android. You can overclock, you can use game cheats and mods. You can play music and videos. You can use game controllers from other consoles on it. You can play your PC games on Switch by streaming them from your PC. All sorts of possibilities.
Ubuntu is pretty upfront about any telemetry and allows you to disable it easily. A lot of Android’s telemetry can’t be opted out of, unless you happen to have an unlocked bootloader and can install a privacy-focused custom ROM.
These are not the same, although I get the point you’re trying to make. Ubuntu has a user-friendly interface, with a goal of making Linux accessible to all. But for anybody who wants to, it’s fairly easy to dig into the internals and become a “power user.” It certainly makes no attempt to stop you from doing so. Android, on the other hand, on MOST instances, locks down everything, with little to no overrides, even from the user, many times “in the name of security.”
Seriously doubt this is an API issue. The error itself would make it seem like it’s a problem with your browser, but unless you have some overzealous privacy extensions installed that are hiding your user agent, it’s more likely to be a temporary problem on their side.
It should also respect your PRIVACY! There are numerous articles about CPAP machines transmitting your data to not only your doctor but also your insurance company, WITHOUT your consent. Possibly your employer as well. If your insurance company decides you’re “not complying” and using your CPAP machine enough, they’ll take it away from you. Your employer could fire you.
Having a sleep apnea diagnosis can also limit you from certain jobs, and can make it harder to get life insurance. In some ways it feels like you’re not a free man anymore.
I ordered this Anker USB-C dock as soon as I got my Deck: https://a.co/d/alhyc1U
I had the old plastic stand that came with the Wii U Gamepad, it fits the Steam Deck pretty perfectly. If you go this route, and want to stand your Steam Deck up, make sure to get a short 6-inch to 1-foot USB-C extension cable. The cord on the dock is a bit too short to reach the top of the Steam Deck. Aside from that, this dock is perfect. It’s one of few I’ve found with two HDMI ports.
I also ordered the official Steam Deck Dock when it was released. I tried to use it at work, but my two monitors are HDMI, and the official dock has one HDMI port and one DisplayPort. I tried using an HDMI-to-DisplayPort adapter. It worked fine in Windows, but I could never get it to work properly in SteamOS. So now I use the Anker dock at work, and the official one at home, where I only have one monitor, or sometimes I’ll use it to plug in to the living room television.
I’ve been using my Steam Deck as my primary PC both at work and at home. Very few issues. I have two monitors, power, ethernet, keyboard, and mouse all connected via a USB-C dock. I love that when I’m done with work I can unplug one USB-C cable and take my work with me. I also have an electric car, and I love being able to play my PC games while waiting for my car to charge.
As a web developer one of the biggest hurdles I had to jump through was getting MySQL Workbench running, as there’s no flatpak or working AppImage available. The lack of CUPS for printing support is another nuisance, but I believe that can be overcome without unlocking the root partition by installing it as a systemd extension. I haven’t taken the time to fully prove this theory though. You can also print using netcat.
I installed a 2TB SSD in mine. I have a small 256gb Windows partition that I rarely use for the few things I need Windows for. I also DJ as a side hobby, and I’ve used my Steam Deck for that too.
I bought my son a used Surface Pro 4 for schoolwork. Luckily we haven’t run into many problems, but there is a known problem where the processor still runs the battery dead when it’s shut off. You’re actually better off using standby.
If he runs the battery dead, we can plug it in and it will boot, but shortly die afterwards. But if we wait ~15 minutes to charge it a little, it stays on as long as we want it to.
You can pirate without a VPN, just don’t use torrents. All major file hosts (like MEGA, Google Drive, etc.) use HTTPS. Your ISP can see that you’re downloading from them, but they can’t tell what you’re downloading nor whether it’s pirated content. People get busted for torrents all the time, downloading from other places (NOT P2P!)? Practically unheard of.
This broke the "MAS" scripts, at least as far as HWID activation. From their website:
Note: Microsoft servers are currently rejecting HWID activation requests when activating through MAS, we’re checking what’s going on now. Use the KMS38 activation option for now.
We’re running Linux on the vast majority of PCs at my job. We used to run Lubuntu, but switched to Debian. You can use pam_mount so user folders are mounted from a server at login, to create a “roaming profiles” environment. But there really isn’t a great solution for laptop users that might be away from the office.
If you do use pam_mount, don’t mount their entire home folder. That will end up throwing a bunch of stuff on the server, like chrome temporary internet files, and their .config folder, that just aren’t needed on the server and will slow everything down. Just mount their individual Documents, Downloads, Pictures, Videos, Desktop, etc. folders.
We’re a small business, we don’t have any Enterprise Support or anything like that.
There’s no one “proper” way. Running multiple DEs shouldn’t break anything, but each DE comes with it’s own set of dependencies and other software, so it does add clutter. There will also be considerable overlap with config files, so if you change a setting in one DE, it could change settings when using another DE.
Having a separate user account per DE will prevent most of the configuration overlap, but it doesn’t solve the abundance of packages you’ll have installed from having multiple DEs. I don’t think there’s a great “clean” way to do it.
One thing I love about Linux though, is how relatively flexible the user home directory is. When moving to a new distro or PC, usually everything you need to copy over is within your home directory. For what you’re trying to do, I’d consider throwing /home on a separate partition. That way, you can try out multiple DEs and distros, without blowing away your home folder. And you’d be surprised at how small your root partition can be, the vast majority of your storage should likely be reserved for /home. The Steam Deck, for example, uses a root partition that is only 5 gb. On a typical Linux system, I’ve found 64 gb to be plenty for root.
When switching distros and/or DEs, consider cleaning out various config files in your home folder. Almost all of them will be hidden files that have a filename that begins with a period. I only keep specific config files for programs I want to retain data for, like Google Chrome (.config/google-chrome), Thunderbird (.thunderbird), and Steam (.local/share/Steam). If you use SSH keys you’ll want to keep your .ssh folder too. But deleting all other config files will give you a pretty clean start when changing DEs.
Try installing Linux on it. Check out AnLinux. I’m running Debian with KDE on mine.
I personally have both the official dock and this “usb-c hub” made by Anker:
https://a.co/d/0aaiUuM
I use the official dock at home, but I use the Anker dock at work. Overall I think I like the Anker one better. It has two HDMI ports that I use with my dual-monitor setup at work. The official dock has one more USB port, but the Anker one includes microSD and SD card readers.
My biggest complaint with the official one is that I couldn’t get it to work right with my dual monitors. I tried using a DisplayPort to HDMI adapter. Surprisingly, I managed to get it to work properly in Windows, but never in SteamOS. We have other computers running Debian Linux at work using the same DisplayPort adapters, with no issue.
Favorite? Pretty much what everybody else says. Portability. Battery life, all things considered. Controls feel great. Amazing handheld for emulation. I have an electric car, and I love being able to use my Steam Deck whenever I’m waiting for my car to charge.
My least favorite? The touchscreen. It’s garbage. I was excited thinking I could play Osu on it. Nowhere close. It’s not really even accurate enough for higher-level Plants vs. Zombies. You’d think a device like the Steam Deck would be great to dual-booted or virtualize Android on, but with the crappy touch screen, I can’t recommend it. But the worst part is trying to use the on-screen keyboard with it. I use my Steam Deck as a PC replacement at work. I’m a sysadmin, I’ve been using Linux for two decades, but the touchscreen makes even the most basic terminal commands painful to type with the OSK. So if you plan on using it heavily as a PC, or doing a lot of tinkering with it like I do, do yourself a favor and get a physical keyboard for it. Bluetooth ones are okay, but having a full-blown keyboard, mouse, and monitor with USB-C dock is definitely nice if you’re using it for more than just a game console.
file.pizza if this is a one off or rare occurrence. If you’re doing this regularly, there are better options, provided the person at the “source” computer is competent. A significant question is whether or not these computers are on the same network. I would recommend running a HTTP server if you don’t care about privacy, HTTPS if you do. There’s no need to buy an SSL certificate, self-signed is more than adequate for this purpose.
It’s more complicated to set up, but the advantage is that when you’re done you can send the receiving party a link they can open in any web browser, no hassle.