I think moving beyond C++ is critical for the long term success of KDE, glad to see it’s a new goal
I think moving beyond C++ is critical for the long term success of KDE, glad to see it’s a new goal
Like many others, I have mixed feelings on this. If anyone is stopping by and doesn’t want to read through the linked forum thread, this is frameworks goal:
This isn’t a program to get people to go to conferences and rep Framework, it’s a program to give people who are already going to conferences and showing off their Framework some swag and opportunities to talk with the team. It’s not assigning work, it’s just saying thank you to people who are excited about Framework and active in the Linux community.
Also worth noting that pfsense was ready and intending to knowingly ship a broken and insecure wireguard integration
Yup that’s exactly correct. I will say one of the benefits of the AC finity is the alarm. If the temp gets too high it beeps to let you know
https://acinfinity.com/closet-room-fan-systems/
They have a lot of products, including other fans and thermostats. I’ve had their media cabinet fans running 24/7 for 4-5 years now with no problems. Highly recommend it.
Otherwise you could use something like this and a standard 12v power adapter https://www.tindie.com/products/mmm999/dc-12v-four-wire-thermostat-pwm-pc-cpu-fan/
This isn’t a joke. Often times rewriting features like this will allow the code to be more streamlined and use the latest KDE library features. This is brining new features using modern and more maintable code that solves long standing issues. Fixing the old code sometimes isn’t worth the effort for a variety of reasons (based on unmaintained libraries, the original code might have been written a while ago so it’s had many revisions of fixes that necessarily complicated the code, etc.)
You’ve gotten a lot of good answers, so I’m going to do some out of the box thinking - maybe it will spark a few ideas.
Goal:
Issues:
So if I were going to do this myself, I’d start with a pelican or other similar watertight container. We don’t want the equipment getting wet, and we don’t want it exposed to the salty air.
I’d probably pick a usff computer, like a dell 9020 or maybe a framework motherboard. To get the storage, I’d get one of these to add multiple sata ports to the computer. Then its a matter of getting a bunch of ssds and powering them. I think the 12v goal is going to be too restrictive, most laptops need 19v to charge, so I’d just bite the bullet and get an inverter. If you’re really tight on power you could go with a pi, but the framework motherboard/usff both use mobile processors, and shouldn’t draw too much while idle.
Any wires that pass though to the case should be made through waterproof bulkheads.
Personally I’d nix the HDMI out requirement. One more port to keep track of and it complicates the self hosting. If you want it for media streaming to a TV then I’d recommend a roku and just run a jellyfin server on the computer. If you want it for server debugging I wouldn’t bother running it out of the case.
The last thing I’d do is figure out cooling. For this I’d probably create some sort of closed loop heat exchanger from the case to either the outside air or the lake/ocean itself. This could be as simple as a pump running water through two radiators, one in the case and the other outside or just dumped overboard. If you know your power usage ahead of time you might be able to get away with a peltier element, dumping the heat outside the case.
I’d probably put this all on its own power system, get a solar panel, battery, inverter, etc. It could even get topped off by the boat’s system if it needs extra juice.
Also whatever you do, I’d figure out a way to ensure you’re giving your system a clean and steady 12v.
“The cause is a new SATA specification which includes the ability to disable power to the hard disk. When you look at the SATA power connection on the back of your hard drive, there are 15 pins that make contact with your power supply. It’s the third pin that delivers a 3.3V signal that disables the drive. What we need to do is prevent that third pin from making contact with the power cable.”
Some hotswap harddrive bays use this feature, definitely more common in enterprise scenarios or in USB HDD enclosures.
I’ve always liked the ultrastar line. Used to be made by HGST and then WD bought them. I’m using specifically the HC530 14tb. The line has a long history of being very reliable enterprise drives.
I’ve bought mine from both goharddrive and serverpartsdeals. Both are reliable resellers of used storage. They’ll warranty the drives for 2 or 5 years depending on which you to with. Prices are ~$130-$150.
Be aware you might need to do the electrical tape over some of the power pins hacks depending on your setup.
Ps. One of the listings for the HC530 on goharddrive or serverpartdeals is incorrectly labels as HC520. Just pay close attention.
As far as raid goes, Raid 10 is currently very popular for its speed and drive failure tolerance. Remember, raid is not a replacement for the 3-2-1 backup rule. Raid has some fault tolerances for bad hard drives, but doesn’t protect against a failed raid card, fire, flood, robber, acts of god, etc.
You can also look into zfs and truenas if you feel inclined. Be aware that if you go with this setup, ecc ram is basically a requirement
I have no complaints with the framework keyboard, is there a particular issue you’re concerned about? The track pad is almost apple quality. Certainly better than most laptops I’ve used.
Love my 11th gen framework, but there is an issue with the 11th gens where the CMOS battery will die rather quickly. If it does die then the laptop needs to be plugged in to turn on, even if it is fully charged. Framework is aware of the issue and will send a free replacement battery or, if you can solder, a mod that will eliminate the issue for good.
Still love framework and would definitely recommend them - but the 11th gen line (their first product) has a few gotchas
I was looking into this last night, what’s the current Dev status of termux? I saw the last release is from 2022 and there’s a call for more maintaiers.
Not sure your budget, but you might be interested in one of these https://us.starlabs.systems/pages/starlite
I’ll start this by saying I’m not familiar with either model, but as a general rule, always go x86 when you can. The Intel processor is going to be much better supported. You might get the snapdragon version to run, but it likely isn’t supported by mainline Linux.
That being said, touch screen support on Linux is improving rapidly, but still isn’t quite there. Make sure you’re aware of the user experience before buying so you won’t be disappointed.
Also, my unsolicited 2 cents, I would try to avoid buying lenovo. I’ve had the unfortunate responsibility of fixing a few of their products (an all-in-one and a few laptops, including a new thinkpad) and can confidently say their reliability, and repairability have greatly diminished. They use cheap parts and are in general, poorly designed.
Onshape hands down. Browser based so there’s no compatibility issues. It’s super easy to use and pretty powerful. Its free for hobbiests (the caveat being your models will be publically accessible). We use it exclusively at work and it’s been awesome.
I’d love a good Foss CAD package but there are too many issues with the current ones for me to make the jump.
Migadu micro tier is $19/year. Great service and has a great privacy policy. Basically unlimited domains. Ive been very happy with them.
That’s definitely something to be aware of, but the vdev expansion feature was mergered and will be released probably this year.
Additionally, it looks like the authors main gripe is the current way to expand is to add more vdevs. If you plan this out ahead of time then adding more vdevs incrementally isn’t an issue, you just need to buy enough drives for a vdev. In homelab use this might an issue, but if OP is planning on a 40 drive setup then needing to buy drives in groups of 2-3 instead of individually shouldn’t be a huge deal.
You need to research raid 1,6,10 and zfs first. Make an informed decision and go from there. You’re basing the number of drives off of (uninformed) assumptions and that’s going to drive all of your decisions the wrong way. Start with figuring out your target storage amount and how many drive failures you can tolerate.
I’ve been using migadu and its been great so far
The success of KDE depends on maintaining and attracting new developers. C++ is decreasing in popularity, with less people becoming willimg to learn it overtime. Adding more modern languages to the mix that are more pleasant to write with will help keep KDE popular with devs.