Indiana waiting for Texas and Florida to ban it so it can do something more extreme but without any flak.
Indiana waiting for Texas and Florida to ban it so it can do something more extreme but without any flak.
I am a fan of Vista
Alright, let’s get out the burning stakes.
Should be every single one that supports IPv6.
Oh, the software is actually called SANE. I thought you were just making clear how bad Brother’s drivers were.
Anyone else chuckle on the parallel in saying to use the UUID is no different than saying “just hardcore the IP bro”
It’s more like setting a static IP. The UUID is set when you create the partition and won’t change unless you force it to change.
You can also use any of the GUI utilities which can add it to your fstab.
There’s a lot of things that are made way too difficult on Linux for seemingly no reason. This isn’t one of them.
I just accidentally deleted my crontab about an hour ago because r is right next to e.
Fortunately my computer backs itself up often so I could just grab the old crontab but it was annoying and would have been problematic if I didn’t.
I also had to recover my computer a few months back because someone whoopsied the default apt repositories for Ubuntu x64 arch and pushed the x86 software there instead.
It’s usually considered a poor idea to use it also as an AP.
The location usually isn’t great for your WiFi and there are better tools for the job.
OpnSense would be the easiest way if you wanted to go. It’s still not easy, but the articles online should help you out.
First you’d need a machine. I’ve got an m920q I bought off eBay for $135 after shipping.
The computer will likely only have one Ethernet port. And it’s likely the port is Realtek which isn’t supported well.
So, you’ll need to get yourself a NIC (a fancy term for a network card). There are good forum posts and articles online about the best NICs to buy for your needs. Intel is a must. However, you can find many of their NICs online labeled as another brand - usually HP, Lenovo, or Dell. Again, the forum posts will tell you what to look for.
If you bought the same computer I mentioned above, you’ll also need a riser and a bezel. Amazon and eBay will have a good selection.
Now assemble it. Flash the computer with OpnSense. Don’t plug it in as your router yet. Follow along with some basic setup guides online to figure out how you want it configured.
Once you’re happy, plug it in as your router and test that it works. If not, you’ll need to put your old router back in place until you can figure out what you need to change.
For NASA, similar desk layout, but it does look more modernized.
https://images-assets.nasa.gov/image/KSC-20181107-PH_BOE01_0002/KSC-20181107-PH_BOE01_0002~large.jpg
If Microsoft switches (seemlessly) to a Linux kernel, no one would really notice.
Besides quite literally every piece of software breaking, sure.
My favorite when reading sports news is “resign”.
It can mean that they quit or that they entered into a new contract.
Ctrl+Shift+V exists now which does the exact same thing.
Actually it’s a bit better. Excel always ignores alt codes for the first key press or two after switching windows.
The best part of LSCR containers is that their Docker config is rather standardized.
The worst part is they haven’t figured out logging for like 75% of them.
Lol I once searched for a specific issue I had.
I found a Github issue for the exact same bug. Perfect!
It had only one reply. “This has already been answered here. Search the other issues for the answer.”
It was the second issue ever for the repo. The first issue was entirely irrelevant. The half a dozen other issues that came after also were irrelevant.
GPT is a partitioning table. EFI is a bootloader firmware interface.
It always comes down to the vendor and driver.
On Linux, I had to go through a dozen different drivers and just as many driver versions before I found the one that worked with my printer. For Windows, it worked immediately.
With my old printer, though, it was the opposite experience. Took forever to get it working on Windows but Linux got it immediately.
You’d think by now, with the dozen different printing standards that exist, we’d have some sort of plug and play driver that could work with every printer.
Set up a CUPS server and it’ll work fine with Windows too.
Printers are a massive headache on both. But at least with CUPS it’s only a massive headache once.
At least for Ubuntu, you do need to set the permissions of the AppImage before it’ll launch.
I still haven’t figured out how to make .desktop files work yet.
https://pcpartpicker.com/list/JhPvZJ
I didn’t even bother getting the best price. I just selected things that would work well.
Get an LSI HBA in IT Mode for another $60 to add another 8 drives.
The case was chosen because it can support 11 drives. It comes with six bays by default but you can buy packs of two bays for $15.
As is, this will cost ~$560 plus the drives and allow you to use eleven 3.5", but cheaper and better options for the PSU, mobo, SSD and memory are out there. I just selected things that would be useful for what you need and provide better hardware than a Synology.
If you don’t need as much storage, you can shave off $160 with a cheaper case and skip the HBA.
That’s the only reason I bought a modern car.
My parents would always buy cheap beaters. They had a car from the 90s they only recently got rid of because the transmission was shot. My first car was an '05 Caravan I drove for almost two years and got rid of in 2018.
I swallowed the pill after seeing cars get absolutely crushed to the point where the jaws of life were necessary yet passengers could just walk out.
I remember someone posted a picture of their brand new sedan. It was involved in a serious accident and sandwiched between two large pickup trucks. The entire car was squished down until it was smaller than the passenger compartment. The driver was able to walk away with minor injuries and the paramedics weren’t even surprised.
I don’t give a shit about the fancy features. I just want something that is reliable and safe.