deleted by creator
deleted by creator
I’d use clonezilla
E: It’s not that it can’t be done other ways, it’s just clonezilla will work and has worked for nearly 2 decades. Also there’s no information provided above about the data. So clonezilla is nice if it’s a complicated scenario.
Plus, it’s a nice tool to throw in the toolbox once you know how to use it.
E. Why do you feel like you have to use something like dd for this particular task? Less than 16 GB of data? Ya probably could have copied it over manually by now.
If it’s accessible using primary IP on the main system , firewall is set or completely disabled and both client and server are on the same network, then I’m not sure. Unless there’s some kinda of network setting mismatch on the laptop or a configuration in Jellyfin not allowing connections outside the host , then I’m not sure. We did cover the basics, so I’m sorry it’s not working.
Ok. So you’re definitely not trying to use 127.0.0.1 remotely.
So on your phone’s web browser ( using the same WiFi ) if you visit http://<ip of mint system>:8096 and nothing happens then it’s the firewall on the mint system. You would need to allow ports 8096/8097.
I’ve never used Linux mint, but if it’s Debian based then it might be using UFW firewall.
First, check that if firewall is running. Open a terminal and type:
sudo ufw status
Step 2: Open ports 8096 and 8097
To allow traffic through ports 8096 and 8097, use the following commands:
sudo ufw allow 8096/tcp
sudo ufw allow 8097/tcp
This opens both ports for TCP traffic. If you also want to open the ports for UDP traffic, you can use:
sudo ufw allow 8096/udp
sudo ufw allow 8097/udp
Step 3: Verify the rules
Once you’ve added the rules, you can check the firewall status to verify the changes:
sudo ufw status
You should see entries for ports 8096 and 8097 allowing TCP (and/or UDP) traffic.
Step 4: Reload firewall (if necessary)
If the changes do not take effect immediately, you may reload the firewall using:
sudo ufw reload
Now, the firewall should allow traffic through ports 8096 and 8097.
Ok. What address are you using when trying access the server on your phone or Jellyfin client?
Edit: An address like this http://127.0.0.1:8096 or this http://<ip address of Linux mint system>:8096/
How? Like http://<ip of mint>:8096 in a web browser? On the same system running the server or is this a separate computer?
How do you know the server is worker fine? How are you accessing it to know that?
E:
Do you have a firewall running on your mint installation? If so have you allowed the ports (8096/8097)
Can you access the web client on the Mint installation http://<ip of mint>:8096
Can you use that same address on your phone / another computer to access it?
FYI If you’re using 127.0.0.1 that will not work on your phone or any client that’s not running the Jellyfin server.
When you use the Jellyfin app which server address are you putting in?
Which is unfortunate. Hiding projects, code and support behind discord is just wrong.
There are Linux and open source communities on discord. I mean, just think about that for a second. These people have chosen to put their stuff on a platform that has refused to acknowledge the existence of their OS / development platform. Every other post on Reddit in the Linux community before I left was about some half assed discord workaround.
Is there a firmware update for the controller when using the Xbox accessory App on windows?
If you’re using invidious and have the web client, iOS or android client like Yattee… wouldn’t your default feed essentially be a playlist of all new videos?
Thanks for sharing!
While there are existing tools like journal-viewer (https://github.com/mingue/journal-viewer), which uses WebKit, I found that its GUI doesn’t integrate well with the Qt/Plasma ecosystem.
I was going to bring that up. I’ve never heard of journal-viewer, but I have used:
You mentioned specifically integrating well into QtPlasma, what improvements do you hope to have over the native KDE KSystemLog?
It seems that the commenter’s intention was clear to everyone except you. The commenter acknowledged the need for RAID software or a specific file system, mentioning that it had already been addressed. Understood the budget and OP being an newb.
Although their tone may have been blunt, they stayed focused on their original point.
But you just kept nagging. lol
Either way OP was helped and now you can sleep knowing you did your part. A true internet hero.
I was finally able to fix the washed out issue when enabling HDR.
Turns out my TV has known HDR issues with devices like the AppleTV Apple Discussion I reset the picture to default. Opened the picture menu where it displays the signal. Enabled HDR on the Display Configuration and this time instead of washed out, it was an actual proper HDR desktop.
this is beautiful
Then there has to be a firewall, web server whitelist or some kind of configuration issue with the service being hosted. Because according to all your responses they are on the same WiFi with the same subnet/gateway/netmask.
Same netmask?
When asking for network troubleshooting assistance, super useful to provide ANY kind of network info. So far we have WiFi and same subnet. Yet absolutely no details which are necessary to help form questions or provide answer.
Can you post the IP Netmask and Gateway of your Linux server and one of your mobile devices that can’t view the server?
Can you ssh into the Linux server from your mobile device?
Same. It’s been on my list for too long.
Your network is probably configured with inconsistent subnets / netmasks. iOS / Android are on WiFi and getting a different subnet/netmask than your severs.
Edit: What does pinging the server with nmap mean? Are you checking open ports or pinging the server? That doesn’t make sense or at least leaves us with more questions with the way you worded that. Although the nmap utility can provide both of those answers, I’m not sure that’s what you meant. Technically nmap and ping are two different tools.
I couldn’t agree more. I had a foot in both the MacOS and Microsoft Windows worlds at the time and can appreciate what a game changer notepad++ became. Having used BBEdit on the Mac since around the mid 90s, it was kinda more like “it’s about time” a decade later when notepad++ was released. I’m not necessarily comparing them feature to feature, but it was a much needed piece of software for Windows. I still have memories of opening up text files and being like … damn someone f’d this txt file up on a windows machine… again.