The TL;DR is that the organization that controls the HDMI standard won’t allow any open source implementation of HDMI 2.1.
So the hardware is fully capable of it, but they’ll get in trouble if them officially implement it.
Instead it’s officially HDMI 2 (which maxes out at 4k @ 60Hz), but through a technique called chroma sub-sampling they’ve been able to raise that up to 4k @ 120Hz.
However there are some minor reductions in picture quality because of this, and the whole thing would be much easier if the HDMI forum would be more consumer friendly.
In the meantime, the Steam Machine also has display port as a completely issue free display option.
To mention, this is also a problem with HDMI (but not DP).
But just have the usb-c insert top down instead of bottom up, include room for a small loop and cable retention to ensure slack doesnt put pressure on the port. This easily allows for fixed connections with usb-c.
There are also side-screw locking connectors for usb-c. With HDMI, a top-screw option was made for more fixed install scenarios. That design is ugly af and uses a massive amount more room than the usb-c screw lock approach.
Oh, screw lock as in like some PC tower cables? Yes, that would be really nice, I wouldn’t mind that for a phone.
Exactly that.
Its mostly common on commercial devices still, but it is defined.
https://www.usb.org/document-library/usb-type-cr-locking-connector-specification
As an example:
https://www.startech.com/en-us/cables/usb31ccslkv1m
Though again, a lot of this could be mitigated with a loop, strain relief, and inserting from above into a port rather than letting gravity pull it down. But it would be nice to see side screw locks be more common with usb-c.
That usb-c connector with side screw locks looks like a future I want to live in.
It’s futuristic, but it’s open and not corporate. It’s miniaturized and sleek, yet still mechanically rugged.